Digital Rockwell Hardness Testers

Features

Superior design & workmanship
Liquid Crystal Display Touch Panel
Auto and Manual Start Settings
Touch panel backlit LCD display for ease of use
Rigid construction minimizes compliance errors
Various data processing functions including: conversions, tabulations, standard deviation etc.
Easily change test loads by the turn of a dial
Designed for safety, meets EU low voltage standards
Specially fitted to withstand overturning

Bench Top Digital Hardness Testers are only available in North/South America and Europe

Introduction to the Nanovea Digital Rockwell Hardness Tester

The Nanovea Digital Rockwell Hardness Testers is a fully automated hardness tester with digital display. The instrument can be configured for automatic or manual start operation. Multiple options are available quality control pass and failed criteria and a wide variety of sample holders including anvil & round table. A large LCD touch panel with clear display and back light make the machine easy to use and easy to read.


Normal measuring mode screen	Statistical screen

Specifications of the Nanovea Rockwell Hardness Tester*

Test Loads	RHT-1				588.4/60	980.71/00	1471/150	N/Kgf
Test Loads	RHT-2	147.1/15	294.2/30	441.3/45	588.4/60	980.7/100	1471/150	N/Kgf

Load Control	Automatic (Loading - Holding - Release)
Start Operation	Automatic Start/Manual Start Selection
Dwell Time	1~99 sec (Key entry in units of seconds)
Plastic measurement	Standard function, time up to hardness value display after release: 1 to 99 sec.
Scale Display RHT-1	C, D, A, G, B, F, K, E, H, P, M, L, V, S, R
Scale Display RHT-2	15N, 30N, 45N, 15T, 30T, 45T, 15W, 30W, 45W, 15X, 30X, 45X, 15Y, 30Y, 45Y, C, D, A, G, B, F, K, E, H, P, M, L, V, S, R
Data Output	1) Centronics (standard) 2) RS232C or Serial output selectable (Factory setting: RS232C)
Data Memory	Max. 256 test data
Hardness conversion	Specified scale on real time display
OK/NG criteria	Upper and lower limits setting, and HI/LOW display
Data edition	Batch conversion of memorized measurement data (Mean value, max. value, min. value, standard deviation, dispersion (R)). Converted values, same.
RS-232C Communication line	Baud rate: 1200/2400/4800/9600 bps selectable (RS232C) Error detection, parity even/parity none/selectable (RS232C)
Accuracy	Conform to JIS B7726 and ASTM-18
Max sample height	Model 1: 250mm, Model 2: 200mm
Max sample depth	160mm
Dimensions	w220xD550xH830mm
Weight	80kg
Power Supply	Single phase AC100~240v 50/60Hz available for export models

*specifications subject to change without notice.

Standard Accessories	RHT-1	RHT-2
Standard hardness block
HRC60	1	1
HRB90	1	1
80HR30N	-	1
75HR30T	-	1
Diamond indenter (Built In)	1	1
Steel ball indenter (1/16" Ø)	1	1
Spare steel ball (1/16" Ø)	10	10
Anvil 60mm Ø flat	1	1
Anvil V shape	1	1
Lighting device (LED green)	Option	Option
Spare fuse 100~120V 3A, 200~240V 2A	2	2
Power Cord (3P~2.5m)	1	1
Level adjusting leg	4	4
Auxiliary tools	1	1
Stabilizing attachment	1	1
Machine cover	1	1

Optional Accessories	CONTENTS
Steel Ball indenter	1/8”, ¼”, ½”, ¾”,
Steel Ball	1/8”, ¼”, ½”, ¾”,
Round Table	200mm (not tempered)
Anvil	V-Shape (small), Spot, Diamond spot
Long sample testing jig	Vari – rest
Long sample testing jig	Jack – rest
Micro test table for Jominy test	Max. movement: approx. 55mm Min. micro graduation: 1/10mm or 1/160”
Printer iDP – 3110	Form hardness tester add up to result to data output.

infoca@microphotonics.com

For contacts outside North America

Return to Micro Photonics home page] [Return to mechanical testing menu]

For Further information fill out our on-line request form or contact us at 1-866-333-4674:

Micro Photonics Inc.
PO Box 50443
Irvine, CA 92619-0443

Micro Photonics Inc.
PO Box 3129
Allentown, PA 18106-0129