Welcome to Micro Photonics Home Page
Return results

Manual Push/Pull Force Gauge

Manual push pull force gauges measure the tension or compression applied to the probe. Suitable for a wide range of applications.
 
 
Features of the AN/AF series Push Pull Force Gauges
  • Direct reading tension (+) and compression (-)
  • Units for I kgf (2 lb) to 50 kgf (100 lbs) range
  • Complete with hook, probes and other adaptor tips
  • Readout in Kilograms force, Newtons

Introduction
The AEF/ANF series push pull force gauges read out directly on a mechanical dial in kg (AEF )or kg and Newtons (ANF). The unit will hold the highest reading obtained on the gage until released by the red button. 
These are convenient compact instruments economical and always ready to use.  Comes complete with a set of probe tips and extension rod as shown
Applications
Inspection and testing of all kinds of precision parts and mechanisms including relay contacts, and switches
Strength testing for components and assemblies such as wire harness, peel strength or adhesives and packaging.
Connection testing measure the pull out and insertion force of all kinds of connectors and fitted components.
Test Stands
A range of motorized test stands permit more accurate and repeatable measurements.
 
Load range AEF series gauges Kg scale
 
Model Capacity Min Unit Stroke
AEF-1 1 kg 10 g 10 mm
AEF-2 2 kg 20 g 10 mm
AEF-3 3 kg 25 g 10 mm
AEF-5 5 kg 50 g 10 mm
AEF-10 10 kg 100 g 10 mm
AEF-20 20 kg 200 g 10 mm
AEF-30 30 kg 250 g 10 mm
AEF-50 50 kg 500 g 10 mm
Load range ANF series gauges Kg scale as above + N as below
Model Capacity Min Unit Stroke
ANF-10 10N 0.1 N 10 mm
ANF-20 20 N 0.2 N 10 mm
ANF-30 30 N 0.2 N 10 mm
ANF-50 50 N 0.5 N 10 mm
ANF-100 100 N 1 N 10 mm
ANF-200 200 N 2 N 10 mm
ANF-300 300 N 2 N 10 mm
ANF-500 500 N 5 N 10 mm
   
Vertical Test Stands
Model No. 1356 High precision motorized to 200 kgf 1307 Simple motorized 1334 Manual up down
Vertical test stands
Capacity 200 kgf 50 kgf 20 kgf
Stroke 150 mm 100 mm 100 mm
Speed 5 - 80 mm/min 10 - 100 mm/min manual
Column Length / diam 550 mm / 40 mm - -
Column spacing 250 mm - -
Table size 200 mm diam - -
Power AC 110/220 AC 110/220 manual
Weight 65 kg 24 kg 15 kg
Dimensions mm 900 x 355 x 255 245 x 690 x 250 200 x 600 x 205
 
Horizontal Test Stands
Model No. 2252 Motorized with adjustable Y,Z 2254 Manual- wiring harness type 2253 Manual - Y,Z adjustment
Horizontal test stands
Capacity 50 kgf 50 kgf 50 kgf
Stroke 150 mm 70 mm 150mm
Speed 10 - 80 mm/min manual manual
Table size 100 x 100 mm - 100 x 100 mm
Clamp stroke - 0 ~ 9 mm -
Chuck width - 0 ~ 10 mm -
up down range 30 mm - 30 mm
right - left range +/- 15 mm - +/- 15 mm
Power AC 110/220 manual manual
Weight 65 kg 15 kg 20 kg
Dimensions mm 250 x 450 x 200 185 x 60 x 200 250 x 450 x 200
 
Ordering InformationYou can order on line here
 
 
Model Price US Dollars
AEF XX $475.00
ANF XX $475.00
1356 motorized vertical test stand 200 kgf $6800.00
1307 motorized vertical test stand 50 kgf $3400.00
1334 manual vertical test stand 20 kgf $1550.00
2252 motorized horizontal test stand Y, Z adjustments 50 kgf $6850.00
2254 manual horizontal test stand for wire harness 50 kgf $2550.00
2253 manual horizontal test stand Y,Z adjust. 50 kgf $2450.00
standard tips All units supplied with a selection of probe tips for pushing and pulling
| Return To Micro Photonics Home Page | Return to Surface Test Menu Page |

For Further information fill out our on-line request form or contact us at :

Micro Photonics Inc.
PO Box 3129
Allentown, PA 18106-0129

Tel: (610) 366-7103 Fax: (610) 366-7105 E-Mail: info@microphotonics.com